Apply: Engineering And Technical Job Vacancies (May Week 4 Onward) : Application Procedures

Here are currently ongoing Engineering And Technical Job Vacancies 2020 and how to apply. Various Engineering And Technical recruitment positions have been opened as follows:

 

Kindly share with the Whatsapp button below this page. If you have any enqiuiries, let us know in the comment section. You can join our Whatsapp Group For Government (Public Sector) Job Vacancies Alert. Here is the group: >>> Government Job Vacancies Alert Whatsapp Group  <<<

 

Vacancies Today

      1. Business And Administrative Job Vacancies (May Week 4 Onward) – 22 vacancies
      2. Recruitment Of Administrative And Health Perssonnel At COA Herbal Centre – 6 Vacancies
      3. Mastercard Foundation Recruitment 2020
      4. Recruitment Of Manager at Protea Hotels
      5. Masive Recruitment Of Nurses At Malaria Vaccine Research Center
      6. Recruitment Of District Training Coordinator at Sabre Education
      7. Recruitment Of Human Resources And Operations Officer at JSI Research & Training

 

Recruitment Of Loader Operator at Newmont Mining Corporation

 

You will  operate loader at Newmont to deliver material to the appropriate location (primary and oxide crusher, stockpile or waste dump) destination and conduct cleanup activities in a safe and controlled manner.

 

Job Responsibilities

  • Load trucks to appropriate weights and dimensions following the CAT10/10/20 rule.
  • Manage dig face for safe and efficient loading, including managing the dig face to a safe height.
  • Conduct post-shift inspections regarding hazards and defects identified and communicate these to Dispatch / Supervisor and the incoming operators for the smooth running of Operations.
  • Communicate with Truck Operators and Dispatchers to verify that materials are dumped at the correct locations, based on mark-out information.
  • Utilize JIGSAW System to report loader equipment status (i.e. Down, Standby, Delay or Ready), select appropriate delay, and stand by codes.
  • Perform daily housekeeping and safety checks of the loader equipment.
  • Understand the loading activities that need to be completed and the designated location of loading activities.
  • Report and escalate all accidents and incidents occurring in the shift immediately to the Dispatcher / Shift Supervisor.
  • Load MAN Tipper Trucks.
  • Attend all pre-shift instruction meetings.

 

Job Qualifications

  • Senior High School Certificate.
  • Mineral Commission Operators License.
  • Drivers’ License E.
  • Knowledge and understanding of loader operation.
  • General knowledge of loaders and other heavy equipment.
  • Minimum of 2 – 3 years’ loading operation experience in an open pit-mining environment.

 

Working Conditions

Position is in a very remote location. The physical demands and work environment characteristics described here are representatives of those that must be met by an employee to successfully perform essential functions of this job.

  • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus.
  • Physical Demands: While performing the duties of the job, the employee is required to sit in the cabin of heavy mining equipment tracking over uneven surfaces for extended periods, climb stairs, walk and stand.
  • Work Environment: The noise level in the field environment is minimal. Occasional exposure to noise, fumes, high temperature, moving machinery, hazardous materials, sharp edges, dust, pinch-points, vibration, slippery surfaces, extreme weather conditions.
  • Protective Equipment (PPE): Work requires mandatory PPE such as helmet, goggles, high visible clothing, safety harness, earplugs and dust mask according to working conditions.
  • Incumbent occasionally has to work overtime.

 

Application Procedures : How To Apply

  1. Interested and qualified persons should visit the : Newmont Goldcorp Mining Corporation Recruitment Portal
  2. Then read through the job offer
  3. Afterwards click on the apply now button
  4. You will be required to create an account
  5. Afterwards login with the created login details
  6. Then fill the Newmont Goldcorp Mining Corporation Recruitment form
  7. Then click on the submit button to submit

 

Closing Date : 26 July, 2020

 

Recruitment Of Driller at Newmont Mining Corporation

 

You will conduct daily operation of drills, monitor associated consumables to drill in an in-situ rock mass or boulders and prepare them sufficiently for blasting, in a safe and controlled manner.

 

Job Responsibilities

  • Utilize the pre-split drill (Cubex) and production drill (D45KS) to accomplish various drill activities
  • Maneuver and position drill by using jigsaw system, site plans and layouts and set correct angles and depths.
  • Conduct pre-operational checks and monitor conditions by verifying component functionality, fluid levels and fittings, as well as depth and alignment of collaring positions.
  • Communicate with the Dispatcher and Supervisor regarding hazards encountered to provide sufficient information to the incoming Driller for the smooth running of Operations.
  • Prepare and maintain daily drill report and log book to outline shift activities.
  • Provide hands-on assistance during drilling activities to fellow colleagues to ensure that safe work practices always.
  • Follow all safety policies, procedures and legislation.
  • Attend daily pre start meetings.
  • Perform other related activities, as assigned by the Drill Supervisor.

 

Job Qualifications

  • Senior High School Certificate
  • MINCOM Equipment Competency.
  • License E (drill).
  • Strong understanding of drill tool mechanical systems.
  • General understanding of mining operations.
  • General understanding of equipment controls and electronics.
  • General knowledge in mid-to-heavy equipment operation.
  • Minimum of 2 – 3 years’ drilling and off-siding experience in a large open pit or quarry environment.

 

Working Conditions

Position is in a very remote location. The physical demands and work environment characteristics described here are representatives of those that must be met by an employee to successfully perform essential functions of this job.

  • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus.
  • Physical Demands: While performing the duties of the job, the employee is required to sit in the cabin of a heavy mining equipment for extended periods, climb stairs, walk and stand.
  • Work Environment: The noise level in the field environment is minimal. Occasional exposure to noise, fumes, high temperature, moving machinery, hazardous materials, sharp edges, dust, pinch-points, vibration, slippery surfaces, extreme weather conditions.
  • Protective Equipment (PPE): Work requires mandatory PPE such as helmet, goggles, high visible clothing, safety harness, earplugs and dust mask according to working conditions.
  • Incumbent is expected to lift heavy materials and/or operate heavy machinery and is exposed to moving machinery.

 

Application Procedures : How To Apply

  1. Interested and qualified persons should visit the : Newmont Goldcorp Mining Corporation Recruitment Portal
  2. Then read through the job offer
  3. Afterwards click on the apply now button
  4. You will be required to create an account
  5. Afterwards login with the created login details
  6. Then fill the Newmont Goldcorp Mining Corporation Recruitment form
  7. Then click on the submit button to submit

 

Closing Date : 26 July, 2020

 

 

Recruitment Of Dozer Operator at Newmont Mining Corporation

 

You will operate dozer to deliver daily maintenance of pit, dump and stockpile floors and roads, as well as managing the efficient operation of all dumping operations, in a safe and controlled manner.

 

Job Responsibilities

  • Conduct pushing/ dozing activities such as:
    • Clearing pit environment after blasting activities.
    • Conducting clearing and stripping as required for mining activities.
  • Perform clean-up activities and maintain road grades for shovels / excavators and loaders.
  • Use dozer to perform cut and fill to design using GPS (dozer files) or field sticks / pegs.
  • Manage waste dump and stockpile tip-ends including the safe, accurate spotting of haul trucks for dumping.
  • Conduct post-shift inspections regarding hazards and defects identified and communicate these to Dispatch/ Supervisor and the incoming operators for the smooth running of Operations.
  • Communicate with Loading Equipment Operators to verify the safety of clean-up activities inside the loading unit proximity.
  • Inspect and operate dozer, in compliance with Newmont and manufacturer specifications.
  • Follow all safety policies, procedures and legislation.

 

Job Qualifications

  • Senior High School Certificate.
  • Mineral Commission Operators License.
  • Drivers’ License E.
  • Knowledge and understanding of dozer operations.
  • General knowledge of dozers and other heavy equipment.
  • Minimum of 2 – 3 years’ dozing operation experience in an open pit-mining environment.

 

Working Conditions

Position is in a very remote location. The physical demands and work environment characteristics described here are representatives of those that must be met by an employee to successfully perform essential functions of this job.

  • Specific vision abilities required by the job include close vision, distance vision, color vision, peripheral vision, and ability to adjust focus.
  • Physical Demands: While performing the duties of the job, the employee is required to sit in the cabin of heavy mining equipment tracking over uneven surfaces for extended periods, climb stairs, walk and stand.
  • Work Environment: The noise level in the field environment is minimal. Occasional exposure to noise, fumes, high temperature, moving machinery, hazardous materials, sharp edges, dust, pinch-points, vibration, slippery surfaces, extreme weather conditions.
  • Protective Equipment (PPE): Work requires mandatory PPE such as helmet, goggles, high visible clothing, safety harness, ear plugs and dust mask according to working conditions.
  • Incumbent occasionally has to work overtime.

 

Application Procedures : How To Apply

  1. Interested and qualified persons should visit the : Newmont Goldcorp Mining Corporation Recruitment Portal
  2. Then read through the job offer
  3. Afterwards click on the apply now button
  4. You will be required to create an account
  5. Afterwards login with the created login details
  6. Then fill the Newmont Goldcorp Mining Corporation Recruitment form
  7. Then click on the submit button to submit

 

Closing Date : 26 July, 2020

 

 

Recruitment Of Construction Project Manager at CBCL Ghana

 

The ideal candidate will oversee projects from bidding to execution. You will work with senior management and act as the point of contact for clients.

 

Job Responsibilities

  • Oversee all stages of project life cycle
  • Manage project budget
  • Provide timely status reports to stakeholders

 

Job Qualifications

  • 5+ years of experience
  • Strong organizational and project management skills
  • Industry knowledge and ability to read blueprints
  • Detail-oriented and strong communication skills

 

Application Procedures : How To Apply

  1. Interested and qualified persons should visit the : CBCL Ghana Recruitment Portal.
  2. Then read through the job offer
  3. Afterwards click on the apply now button
  4. You will be required to create a linked in account if you dont have one
  5. Afterwards click on the login button
  6. Then fill the CBCL Ghana Recruitment form
  7. Then click on the submit button to submit

 

 

Recruitment Of Condition Monitoring Technician ( S/F Infrastructure & STP ) at AngloGold Ashanti (Ghana) Limited

 

Job Responsibilities

  • Work compliantly with the requirement of Government of Ghana Agencies, environmental, health & safety legislation and AGAG regulation
  • Accept personal responsibility for his own health and safety and that of every mine worker affected by his work
  • Adhere to site’s Environmental Management Plan
  • Assist Reliability Engineer in gathering information for reports
  • Conduct audits of surface infrastructure and process plant Equipment.
  • Conduct reviews of the condition monitoring function to identify actions for continuous improvement
  • Assist the Reliability Engineer to develop condition monitoring routes and checks for Plant equipment;
  • Execute CM checks on a routine scheduled basis. This include visual checks, vibration data collection, infrared data collection, ultra sonic data collection, motor current and flux data collection, simple NDT data collection;
  • Analyze and trend predictive maintenance data (vibration, IR, etc.) to determine plant condition and report this condition for action;
  • Monitor general physical condition of plant assets and report
  • Monitor preventive and corrective actions as necessary;
  • Generate work requests in SAP as required for maintenance planning and scheduling
  • Perform routine condition monitoring tasks on all the rotating equipment by data collection using advanced portable data collectors and other tools according to the established schedules and also as per the plant requirements.
  • Gather information on vibration & other data collected in order to diagnose / troubleshoot rotating machinery problems.
  • Actively participate in Reliability improvement programmes and Root Cause Failure Analysis process of Rotating equipment as per requirements.
  • Monitor equipment performance on asset health system and take proactive measures to address symptoms of potential failure
  • Report directly to the reliability engineer on issues and identify and execute improvement projects
  • Stop equipment from working if there exists a high risk or unsafe to be used

 

Job Qualifications

  • Minimum of Diploma or Equivalent Technical qualifications in Mechanical Engineering
  • Level 1 certification in condition monitoring will be an advantage
  • Six (6) years of experience in the mining industry, with at least 2-3 years in an engineering operating facility.
  • Familiarity with the Ghana Minerals and Mining (Health Safety and Technical) Regulation
  • Specialized training in vibration analysis and other condition monitoring techniques
  • Practical knowledge in the use of SAP
  • Must be able to communicate about technical issues both orally and in writing
  • Knowledge in OEM legalities and mining regulations

 

APPLICATION PROCEDURES : HOW TO APPLY

 

  1. Interested and qualified applicants should : Visit The AngloGold Ashanti Portal
  2. Read about the job offer
  3. Then click on the “Apply” button below the page
  4. Then click on the “Creat Account” to create an account
  5. Afterwards login with the email and password your created
  6. The AngloGold Ashanti  application form will show
  7. Fill the form with required details and submit

 

CLOSING DATE: 8TH JUNE, 2020.

 

 

Recruitment Of Maintenance Planning Superintendent at AngloGold Ashanti (Ghana) Limited

 

Job Responsibilities

  • Deliver the Safety Management plan elements for the areas under the incumbent’s control.
  • Provide technical input to the Safety Manager, Technical services manager and Construction Manager in order to develop the safety management plan for the construction and refurbishment works, consistent with AGA’s Integrated Management System and Standards.
  • Review the application of safety standards and work practices for the refurbishment construction workforce to enable the safety targets to be managed and achieved.
  • Apply HSE regulations with zero tolerance to breaches.
  • Demonstrate safety behaviour consistent with AGAG’s vision and values.
  • Lead by example to create a safe working environment, where risks are assessed and managed so tasks are performed without risk of injury or harm.
  • As a minimum, achieve zero reportable environmental incidents, zero compliance breaches and no events requiring public disclosure.
  • Utilise ‘Analyse and Improve’ tools to investigate process interruptions so that exposure to environmental risks is reduced.
  • Reduce energy usage by running the plant energy consumption per unit produced at the optimal rate within sphere of influence
  • Support the Processing Department to maintain Cyanide Code certification.
  • Take active accountability for the performance, training and development of the maintenance planning team to ensure the company gets the best out of every employee under your area.
  • Using AGA’s How we Work guidelines, clearly define the roles and accountabilities of subordinates.
  • Recruit and appoint people to role in accordance with AGA policy and localisation objectives as directed by the Engineering Manager-Technical.
  • Ensure the organisation structure can deliver the maintenance strategy.
  • Communicate policies and procedures in a manner so as to achieve full understanding and compliance.
  • Provide guidance to subordinates in leadership techniques to achieve maximum performance.
  • Verify that supervisors develop a skills matrix that includes all disciplines and individual achievements.
  • Identify skill deficiencies and initiate corrective action.
  • Develop an appropriate succession plan for key positions with the correct supportive development plan.
  • Provide major inputs to Operational Readiness for the Surface and Underground engineering/maintenance throughout the operation.
  • Develop the Operational Readiness plan for the Engineering team including localisation plan.
  • Engage and develop appropriately skilled, capable and experienced personnel in the area of accountability.
  • Support the development and implementation of systems for the Engineering department to provide effective quality planning of work, efficient and safe work practices, monitoring of performance and promote continuous improvement
  • Lead, direct and manage the AGA Maintenance Planning function to achieve excellent work management and attain effective utilization of labour.
  • Take proactive initiative to ensure shutdowns are planned, scheduled and safely executed within the right window without overrun.
  • In partnership with end users and supply chain, set up a consistent min/max system to ensure smooth flow of spare parts for both planned and unplanned maintenance
  • Design and implement a robust component refurbishment program for ‘rotables’ to ensure that at any point in time every major component has a healthy spare on site.
  • Implement corporate programs, e.g. asset management strategies, System for People, Operational Effectiveness, etc across areas of control.
  • Deploy management routines to identify defects in the workplace and proactively plan and schedule same for execution.
  • Prepare the departmental budget that support the company’s objectives and strategy.
  • Ensure cost impacts in area of accountability are evaluated, approved and budget is revised.
  • Identify, communicate and implement potential cost reduction initiatives.
  • Manage the department in line with operational budget.
  • Communicate to subordinates the relevant financial detail to each individual’s level ensuring their understanding and obligations to meet the budget goals
  • Utilize the SAP asset maintenance management system in maintenance activities.
  • Develop and maintain Engineering Management Plan, as a key Project Execution Plan sub plan in the area of accountability
  • Maintain a regular SAP asset maintenance management system operational readiness interface and hand over meeting.
  • Participate in formal cost and schedule reviews to support accurate and timely reporting.
  • Inspect all component refurbishment works to ensure works are delivered in accordance with applicable designs, specifications and expectations.

 

Job Qualifications And Experience 

  • Minimum of Bachelor’s Degree in Mechanical or Electrical or Maintenance Engineering or equivalent.

  • Masters’ Degree in Management will be an advantage
  • Financial, commercial and project management through work experience and courses.
  • An experienced Maintenance Planning professional with demonstrated experience in gold processing plants maintenance
  • Verifiable experience in shutdown planning for large gold processing plants

  • Surface Processing Plant, Surface and Underground Mine and Support Infrastructure maintenance
  • Experience in Project Management
  • Knowledge of SAP PM module.
  • Must possess Superintendent or Sectional Engineer Certificate of Competency from Mineral Commission of Ghana.
  • Professional Certificated Engineer with a relevant certification body

 

Technical Competencies

  • Strong Maintenance Planning competencies
  • Strong maintenance competencies in fixed plants
  • Sound project management skills
  • Should have analytical skills to be able to evaluate information and solve complex problems.
  • Detail oriented to understand complex systems, and recognition that a minor error can cause major problems.
  • Commercially astute and able to work effectively with third parties.
  • Excellent skills in Microsoft PowerPoint, Word, Project and Excel
  • Must be able to communicate about technical issues both orally and in writing
  • Knowledge in AGA standards
  • Knowledge in OEM legalities and mining regulations
  • Demonstrated understanding of good engineering practices and the implementation of proactive maintenance strategies

 

Leadership Competencies

  • Build and sustain a team of subordinates capable of producing those outputs;
  • Continuously improve the processes used by the team in delivering outputs;
  • Model work behaviors for your subordinates,
  • Consistent with the company values
  • Proven ability to initiate and drive the construction project through its life cycle.
  • To support and motivate the construction project team to deliver the project goals.
  • Finding innovative solutions through creative thinking and problem solving.
  • Create an environment of teamwork and willingness to help coworkers
  • Able to work different kinds of people
  • Organizational skills to keep track of many workers, schedules, and budgets all at once.

 

 

APPLICATION PROCEDURES : HOW TO APPLY

 

  1. Interested and qualified applicants should : Visit The AngloGold Ashanti Portal
  2. Read about the job offer
  3. Then click on the “Apply” button below the page
  4. Then click on the “Creat Account” to create an account
  5. Afterwards login with the email and password your created
  6. The AngloGold Ashanti  application form will show
  7. Fill the form with required details and submit

 

CLOSING DATE: 9TH JUNE, 2020.

 

 

Recruitment Of Maintenance Planner (Shutdowns) at AngloGold Ashanti (Ghana) Limited

 

Job Responsibilities

  • Ensure section’s compliance with the requirement of Government of Ghana Agencies, lending institutions, shareholders’ interests, environmental, health & safety legislation and company regulation
  • Responsible for Safety, Environmental, and Social Responsibility policies for the section and accept personal responsibility for the health and safety of every mine worker under or assigned to his/her supervision.
  • Ensure safe planning of maintenance work during shutdown in all areas on site ensuring the work is in compliance with plant and electrical safety obligations to meet safety targets.
  • Demonstrate safety behaviour consistent with AGAG’s vision and values.
  • Lead by example to create a suitable safe work environment to motivate staff, employees and contractors to achieve optimum effectiveness, productivity and operating costs
  • Support and make room for continuous improvement of safety performance.
  • Support the Maintenance Planning Manager by planning all process plant and equipment shutdown activities.
  • Contribute the refurbishment project and maintenance team with accurate work plans for shutdown.
  • Liaise with the Planning Manager and Project Manager to set work program and target milestones for each phase based on the project plan for shutdown.
  • Monitor critical activities based on the shutdown project schedule and advise shutdown project management accordingly.
  • Prepare and submit updated shutdown work program and cash flow curve showing actual timeplan and identify areas of weakness and establish means and methods for recovery, if any
  • Monitor day to day shutdown work progress and prepare the daily progress and close out report.
  • Maintain and record update of shutdown work progress obtained from Project Managers and Engineering Manager
  • Support the provision of master shutdown project schedule updates with respect to refurbishment and maintenance activities
  • Support the rollout, implementation and training of SAP maintenance system and smooth transition of the system into the operational phase for use in shutdown planning and execution in all on-site areas. Ensure the operating team is appropriately trained and proficient in using the shutdown planning portion of SAP system, to support a smooth shutdown execution.
  • Proactively manage change to avoid potential project cost and schedule overruns.
  • Ensure spares inventory supports current and future shutdown planning requirements.
  • Identify and implement shutdown opportunities to help prevent reoccurring failures that may adversely impact on production.
  • Provide inputs into the identification of reliability monitoring by recognizing irregular and unusual repetition of potential maintenance activities.
  • Ensure asset purchases are effectively and efficiently done in through structured system that is consistent with AGA policies.
  • Provide input to due diligence for procuring goods and services to support the refurbishment work and maintenance plan.
  • Adhere to procurement procedures and processes.
  • Ensure cost codes are correctly allocated to all refurbishment activities.
  • Assist in the development of quality and performance reporting metrics
  • Interface with Contractors and/or Construction teams regarding refurbishment works that support the overall work plan, schedule and expectations.
  • Interface with the operational readiness team, particularly around the rollout and implementation of SAP.
  • Complete the skills matrix and maintain up-to-date
  • Identify skill deficiencies and initiate corrective action
  • Attend key planning meetings on a weekly basis and as required.
  • Participate in shutdown project and maintenance meetings as required.
  • Maintain meeting records, agreed actions, and follow up to ensure actions are completed.
  • Attend regular SAP asset maintenance management system operational readiness interface and hand over meeting.
  • Provide regular feedback to the Planning Manager and Engineering Manager in relation to SAP asset maintenance management system progress rollout and training in shutdown planning, and issues impacting on compliance or causing delays.
  • Participate in internal and external construction audits as required.
  • Produce Daily, weekly, monthly and quarterly reports accurately and timely information that clearly convey the status of shutdown planning and execution and SAP asset maintenance management system rollout.
  • Advise refurbishment and maintenance works progress and KPI status to the Maintenance Control System Advisor, particularly potential cost, schedule or quality variances.
  • Identify and address shutdown and SAP implementation risks, by communicating potential issues to stakeholders in a timely manner.
  • Inspect shutdown works to validate progress and status.
  • Participate in formal monthly risk reviews.
  • Proactively identify and manage change in assigned area of responsibility to avoid potential cost, schedule and quality issues.
  • Provide input into the commissioning plan.
  • Coordinate planning resources to support the commissioning process in the Surface Support Infrastructure.

 

Job Qualifications And Experience 

  • A Bachelor Degree or equivalent tertiary qualification in a relevant (mechanical or electrical) engineering discipline.

Experience 

  • Minimum of 4 years’ experience as maintenance planner/supervisor in mining operations.
  • Project planning highly regarded.
  • Preferably owner’s team, multi-disciplined, design,
  • Construction and commissioning experience, with contractor management experience, within a large blue-chip mining or resources environment.

Technical Competencies

  • SAP
  • Primavera/MS Project
  • Multi-disciplined engineering and construction experience.
  • Familiar with HSE management systems.
  • Managerial leadership and technical skills relevant to the provision of maintenance services.
  • Process plant operation and maintenance practices.
  • Highly flexible, able to balance competing demands/priorities.
  • Ability to work within a team environment
  • Excellent communication skills, both verbal and written.
  • Audit, compliance and governance.
  • Ability to mentor and coach personnel.
  • Ability to present to management and key stakeholders

Leadership Competencies

 

  • Strong interpersonal, communication, influencing, motivational and organizational skills
  • Demonstrated capacity to make sound and timely decisions, by quickly assembling the facts to  develop action priorities
  • Lead by example, displaying technical and managerial leadership.
  • Professional approach to maintaining contractor, authority and client relationships.
  • Able to work harmoniously with a diverse array of personnel.
  • Mentor and develop personnel.
  • Build and maintain effective working relationships, with a range of stakeholders.
  • Displaying high levels of  integrity and honesty
  • Goal-orientated self-starter.
  • Maximize performance, solving problems and analyzing issues to ensure best for project outcomes.

 

 

APPLICATION PROCEDURES : HOW TO APPLY

 

  1. Interested and qualified applicants should : Visit The AngloGold Ashanti Portal
  2. Read about the job offer
  3. Then click on the “Apply” button below the page
  4. Then click on the “Creat Account” to create an account
  5. Afterwards login with the email and password your created
  6. The AngloGold Ashanti  application form will show
  7. Fill the form with required details and submit

 

CLOSING DATE: 9TH JUNE, 2020.

 

Share This Post To:

Leave a Reply

Your email address will not be published. Required fields are marked *