Ongoing Engineering, Technician And Administrative Vacancies At Wayoe Engineering and Constructions Limited

Here is the currently ongoing Wayoe Engineering and Constructions Limited Jobs In Ghana 2020 and how to apply. Various Wayoe Engineering and Constructions (WEC) Limited Job vacancies has been declared as follows:

 

Recruitment Of  Driver At Wayoe Engineering and Constructions Limited

Responsibilities

  • Transport products, materials, and staff safely, securely, and timeously
  • Take ownership and accountability for tasks and activities and demonstrate effective self- management
  • Follow through to ensure that quality and productivity standards of own work are consistently and accurately maintained (lead by example)
  • Inform relevant parties in the event of tasks or deadlines not met and provide appropriate means of resolution
  • Maintain a positive attitude
  • Be presentable and neat at all times whenever interacting with clients
  • Maintain a sober state at all times when carrying out duties
  • Ensure adherence to road safety rules and regulations at all times
  • Demonstrates willingness to help others and “goes the extra mile” to meet team targets and objectives
  • Demonstrates willingness to help others and “goes the extra mile” to meet team targets and objectives
  • Ensure all paper work connected with conveyance of material is correctly completed
  • Ensure vehicles are kept in good working order and clean both inside and outside at all times
  • Hand in month-end statements i.e. vehicle maintenance
  • Keep the logbook up-to-date and submit weekly
  • Carry out daily pre-start maintenance checks on vehicles to ensure they are in sound working condition
  • Recognize electrical and mechanical faults and report to your supervisor
  • Perform periodic maintenance on vehicles, such as changing batteries and motor oil at appropriate times, as well as refueling the vehicle
  • Report any incidents, accidents, or equipment damage immediately to the company
  • Dress professionally and in accordance with the company dress code
  • Run errands as requested by the supervisor or manager
  • Ensure vehicles and equipment are safely and securely stored
  • Advise the company of any requirement for maintenance and/or repairs
  • Ensure good vehicle maintenance i.e. services up-to-date
  • Maintain records of working hours, travel logs, services and/or repairs
  • Comply with site, company and country rules, regulations, and procedures

Click To Check And Apply

 

Recruitment Of Storekeeper At Wayoe Engineering and Constructions Limited

Responsibilities

  • Receives the goods from suppliers and check whether they meet the requirements mentioned in the purchase order
  • Inspect deliveries for damage or discrepancies and report those to accounting for reimbursements and record keeping
  • Arrange received materials as required
  • Ensure that the materials are stored safely
  • Keep a record of receipt and issue of goods
  • Issue materials according to the requirements
  • Dispatch purchase requisition for buying fresh goods
  • Receive, identify, locate and dispense storeroom items.
  • Conduct cycle counting activities of the warehouse storeroom.
  • Maintain computer inventory system.
  • Process all shipping and receiving paperwork.
  • Ensure proper placement of storeroom items in storage cell where items are maintained for use.
  • Post all items received against purchase orders and process paperwork.
  • Properly pack and process items for outgoing shipment; may prepare miscellaneous shipping orders, air freight bills and/or bills of lading.
  • Follow-up on tools checked out of the storeroom and not returned.
  • Develop and maintain procedures for monitoring usage.
  • Notify management of any unusual occurrences in inventory balances, equipment malfunctions, damaged materials or supplies needed.
  • Access, input and retrieve information from the computer

Click To Check And Apply

 

Recruitment Of Steel Erector At Wayoe Engineering and Constructions Limited

Responsibilities

  • Possess the ability to read and understand drawings and follow safe working practices in the pre-assembly and erection of structural steelwork at low and high levels
  • Work according to general arrangements drawing, to ensure correct positioning of steel
  • Possess very good knowledge in slinging loads, signal and work with cranes
  • Working at height and operating high level access equipment e. Mobile Operating Platforms (MEWP’s)
  • Fit prefabricated sheet metal (flashings and trims) and structural decking
  • Install roof, vertical and horizontal cladding systems
  • Efficient use of the tape measure
  • Performs any combination of following duties to raise, place, and unite girders, columns, and other structural-steel members to form completed structures or structure frameworks, working as member of crew.
  • Sets up hoisting equipment for raising placing structural-steel member
  • Fastens steel members to cable of hoist, using chain, cable, or ro
  • Signals worker operating hoisting equipment to lift place steel member.
  • Guides member, using tab line rope or rides on member in order to guide it into positio
  • Pulls, pushes, or pries steel members into approximate position while member is supported by hoisting devic
  • Verifies vertical and horizontal alignment of members, using plumb bob
  • Bolts aligned members to keep them in position until they can be permanently riveted, bolted, or welded in plac

Click To Check And Apply

 

Recruitment Of Health, Safety and Environmental (HSE) Officer At Wayoe Engineering and Constructions Limited

Responsibilities

  • Lead on all HSE related issues and act as a centre of excellence for site HSE.
  • Assist and advise Site Manager and the HSE Manager to discharge their HSE duties imposed upon them by law.
  • Initiate and organise HSE trainings for employees at the site.
  • Ensuring that the company HSE management system is implemented and maintained at site.
  • Undertake periodic workplace inspections.
  • Ensures that a register of Hazardous substances is always maintained.
  • Ensures that a register of lifting equipments and its certifications is always maintained.
  • Ensures that a colour code system is in place and up to date for all lifting and portable equipments.
  • Report and Investigate accidents, incidents and near misses and record the data accordingly.
  • Auditing policies, procedures and company safety standards.
  • Submit monthly HSE performance records to the HSE Manager.
  • Organise, scribe and document HSE meetings at the site.
  • Conduct site inductions and monitor PPE compliance.
  • Ensure that contractors working on company premises or on behalf of the company are competent and controlled whilst they are working on site.
  • Ensures that new employees, temporary workers and contractors are adequately inducted, i.e. given enough HSE information before they begin work.
  • Conduct risk assessment for various tasks and at various departments within the branch.
  • Promote a safety culture within the organization and set a personal example.
  • Initiate and organise HSE monthly meetings, daily TBT/DSTIs.
  • Roll out vehicular safety and inspections on site.
  • Ensure environmental compliance to applicable laws.
  • Ensure a clean environment within the yard and its perimeter by conducting housekeeping audits.

Click To Check And Apply

 

 

Recruitment Of Rigger Wayoe Engineering and Constructions Limited

Responsibilities

  • Conduct a rigging study to determine the weight, height, radius and how far the load will be from the crane
  • Further, use the rigging study to determine which slings and booms must be used
  • Cordon off the area and ensure all SHE standards are met
  • Identify and use hand tools applicable for rigging
  • Identify basic defects in hand tools applicable for rigging (visual inspection)
  • Colour coding and symbolic safety signs
  • Use of various slinging methods
  • Identify and use hand signals
  • Identify and use different slings and lifting equipment
  • Identify faults in lifting tackle (visual inspection)
  • Identifying synthetic ropes and splice ropes as per work instruction and manufacturers standards
  • Inspect rigging equipment and log as per OHS Act (requirement 85 of 1993) and company procedures
  • Conduct a rigging study to determine the weight, height, radius and how far the load will be from the crane.
  • Also use rigging study to determine which slings and booms must be used.
  • Cordon off the area and ensure all SHE standards are met
  • Check weather condition, if they are suitable you can continue
  • Hook the load
  • Offload or install equipment where required
  • Store or make redundant rigging equipment and lifting devices as per company procedures and to OHS Act requirements
  • Establish conditions for lifting and positioning loads
  • Sling equipment as per rigging procedures
  • Interpret drawings and position equipment to ISO standards
  • Determine weight, radius and ground conditions to manufacturers’ specifications and work instructions
  • Read and interpret Crane Load Chart
  • Set up a crane as per work instructions and manufacturers specifications
  • Plan a job task as per work instruction
  • Prepare a job task as per work instruction
  • Pick and carry a load as per work instruction
  • Ability to Work at heights
  • Demonstrate consistent application of internal procedures
  • Escalate identified problems to relevant manager
  • Promote harmony and teamwork
  • Promote sharing of knowledge through informal and formal channels
  • Apply knowledge of the organisational systems, structures, policies and procedures to achieve strategic objectives
  • Plan and prioritise, demonstrating abilities to manage competing demands
  • Communicate effectively, maintaining relationships
  • Comply with site, company, and country rules, regulations and procedures

Click To Check And Apply

 

Recruitment Of Pipe Fitter At Wayoe Engineering and Constructions Limited

Responsibilities

  • Use saws, cutting torches, and pipe benders to cut and hammer pipes to specification
  • Study blueprint and construction plans for pipe systems, supports, and related equipment
  • Assemble and secure pipes, tubes, and fittings by means of welding, brazing, soldering and cementing of joints
  • Fabrication and development from drawings
  • Fabricate spool pieces according to drawings
  • Work with Tacker to assemble and fit the spools
  • Work according to general arrangements drawing, to ensure correct positioning of spools
  • Utilize pressure gauges and hydrostatic testing to inspect and test installed pipe systems
  • Electroplate non-ferrous piping materials with tin and lead to obtain an alloy that prevents erosion
  • Operate pump machines to discard water from flooded facility floors, manholes and basements
  • Prepare cost estimates and budgets for a pipefitting project
  • Install and test water systems such as treatment, recycling, and irrigation systems
  • Design equipment and systems to reduce water and energy consumption
  • Inspect work sites to identify environmental hazards that can limit the integrity of a pipe structure
  • Utilize valve keys and wrenches to regulate liquids, steam and other gaseous substances from pipes
  • Oversee the repair and replacement of damaged or worn out pipe components
  • Use hand or power tools to drill holes in structures such as wall, decks to allow for pipe passage
  • Select pipe types, sizes and quantity required for a pipefitting project
  • Install and configure automatic pipe control systems.
  • Demonstrate consistent application of internal procedures
  • Escalate identified problems to relevant manager
  • Promote harmony and teamwork
  • Promote sharing of knowledge through informal and formal channels
  • Apply knowledge of the organisational systems, structures, policies and procedures to achieve strategic objectives
  • Maintain a positive attitude
  • Respond openly to feedback
  • Plan and prioritise, demonstrating abilities to manage competing demands
  • Communicate effectively, maintaining relationships

Click To Check And Apply

 

 

Recruitment Of Mechanical Fitter At Wayoe Engineering and Constructions Limited

Responsibilities

  • Identification and use of hand tools, lubricants, and cleaning/solvents applicable to the trade
  • Install and align V-belts, chains, gears and couplings
  • Install the following locking devices; Lock nuts, locking plates, split pins, taper pins, dowels and wire method.
  • Identify various types of couplings
  • Report equipment condition periodically in order to plan and schedule maintenance and repairs.
  • Remove any parts that cannot be pressurized
  • Fitter must walk the line to check what is needed to complete the hydro – testing, such as additional bolts etc.
  • Prepare the line for hydro – testing
  • Fill the line with required spec, either pneumatic or hydro
  • Pressurise the line
  • Walk the line to check for leaks
  • Remove bearing from shaft using bearing puller or hand operated press
  • Cleaning of base where equipment must be installed
  • Receive isometric drawing
  • Check required elevation of equipment
  • Check for elevation using a dumpy level
  • Install packers to required elevation
  • Check packers with dumpy level
  • Lowering of equipment into position
  • Experience working on the following pumps: Vertical spindle, Centrifugal, positive displacement, slurry, submersible
  • Install flexible and fixed hydraulic piping, hoses and fittings
  • Installation of mechanical equipment
  • Install hydraulic/pneumatic equipment and cylinders
  • Read and interpret engineering drawings
  • Comply with site, Company safety rules, regulations and procedures
  • Demonstrate consistent application of internal procedures
  • Escalate identified problems to relevant manager
  • Promote harmony and teamwork
  • Promote sharing of knowledge through informal and formal channels
  • Apply knowledge of the organisational systems, structures, policies and procedures to achieve strategic objectives
  • Plan and prioritise, demonstrating abilities to manage competing demands
  • Communicate effectively, maintaining relationships

Click To Check And Apply

 

Recruitment Of Material Controller Wayoe Engineering and Constructions Limited

Responsibilities

Technical Expertise

  • Responsible for ensuring all free issue material, equipment and spares received on site are managed in accordance with the requirements of the project.
  • Execute project specific procedures on site, ensure all support documents and records are maintained.
  • Plan deliveries to Site with responsible Supervisors (Local Projects) and Logistics Coordinators (International Projects)
  • Give notice to the contractors for material to be issued directly to them.
  • Inform the respective Discipline Supervisors regarding abnormal deliveries pre-notice advice and once the delivery arrives. The Discipline Supervisor will confirm the height and width of the delivery and give the approval to proceed.
  • Plan the offloading, storage and safekeeping of equipment/material in specific laydown and/or warehouse areas using the respective pre-alert documentation (local and international).
  • Receive Free Issue Material on site, taking note of tag numbers and condition of equipment.
  • Compile an OS and D Report (over, short or damaged). Keep a photographic record.
  • Advise the responsible Supervisor and or Logistics Coordinator regarding damages for insurance purposes.
  • Ensure the OS & D Register on SharePoint is updated when the OS&D issue is closed-out.
  • Issue of Material to the Contractors or DRA.
  • Update an electronic list of all Free Issue Material and Spares.
  • Ensure that the handover of spares is carried out in accordance with the Spares Procedure.
  • Ensure that all tasks are carried out in accordance with the Site Material Management Procedure.

Click To Check And Apply

 

 

Recruitment Of Coded Welder At Wayoe Engineering and Constructions Limited

Responsibilities

  • Read and understand Welding Procedures (WPS)
  • Employ appropriate welding methods in completing structural fabrications
  • Utilize manual and mechanical processes to weld in various positions
  • Set equipment to weld in vertical, horizontal, flat or overhead positions
  • Prepare metal as necessary to achieve proper surface texture prior to welding
  • Fit and weld metal components for pipelines, tanks and structural steel
  • Weld structural steel in all positions.
  • Weld stainless steel and carbon steel.
  • Receives completed spools from Pipe Fitters and Tackers
  • Welds spools according to ASME IX specifications
  • Must be able to control voltage according to required output
  • Examine work pieces for defects and measure work pieces with straight edges or templates to ensure conformance with specifications.
  • Repair of welding defects
  • Carry out welding operations under intense conditions such as extreme heights, confined spaces and inclement weather
  • Operate welding equipment according to safe work procedures
  • Recognize, set up, and operate hand and power tools common to the welding trade
  • Understand and comply to Company Quality Policies & Procedures as relating to welding equipment and consumable
  • Daily inspection and maintenance of issued welding equipment
  • Comply with Site, Company and Country rules, regulations and procedures
  • Must be able to read welding maps
  • Demonstrate consistent application of internal procedures
  • Escalate identified problems to relevant manager
  • Promote harmony and teamwork
  • Promote sharing of knowledge through informal and formal channels
  • Follow through to ensure that personal quality and productivity standards are consistently and accurately maintained
  • Plan and prioritise, demonstrating abilities to manage competing demands
  • Maintain a positive attitude

Click To Check And Apply

 

 

Recruitment Of Boiler Maker At Wayoe Engineering and Constructions Limited

Responsibilities

  • Read and interpret drawings including but not limited to obtaining orientation from the drawing, compiling a materials list, and lay out and mark off pieces and positions from drawings including template work on plate
  • Efficient use of the tape measure
  • Draw isometric sketches representing the lay out of work to be done as well as the material required
  • Use isometric drawing to create chalk layout
  • Use chalk layout to get precise measurements of steel which will be required
  • Use layout to create required steel parts
  • Fabricate from drawings
  • Fabricate steel structures, plates and pipe works according to drawings
  • Work according to general arrangements drawing, to ensure correct positioning of steel structures
  • Undertake fabrication of underground cages and skips
  • Use of pattern for the development of cones, hoppers and cylinders
  • Identify steel components and differentiate between materials to be worked on
  • Install steel sections, tanks, staircases, and hand railing
  • Work with Tacker to assemble and fit the steel structures
  • Comply with site, Company safety rules, regulations and procedures

Click To Check And Apply

Share This Post To:

Leave a Reply

Your email address will not be published. Required fields are marked *